Model EZ-SX EZ- LX EZ-LX HS

Liên hệ: (024) 8587 8169

Compact solutions for performing tests

The compact size fits easily on tables.
Lower table height (20% lower) and larger work space
This makes it easier to exchange jigs and samples and to perform a wide variety of operations.

EZ Test uses a high-precision load cell that guarantees accuracy to within ±0.5% of the indicted value over a wide range from 1/500 to 1/1 of the load cell capacity.
Tests can be performed at up to maximum load capacity levels across the entire test speed range from 0.001 to 2000 mm/min (HS model).
Maximum test speed: 2000mm/min, Return speed: 3000mm/min (HS model)
The high return speed significantly reduces the wait time between tests, even for those with long displacements.
EZ Test can measure 1000 data per sec, enabling accurate detection of peak force.

Enhanced usability by the adjustable controller
This allows for adjusting the control panel position and angle to match the posture of the operator.
Visual, user-friendly TRAPEZIUMX software
4 software platforms - Single, Cycle, Control, and Texture - enable various types of evaluation.
Power-saving function reduces power consumption by over 55% compared to previous models.

Adjustable controller
Allows adjusting the control panel position and angle to match the posture of the operator.

The new TRViewX video extensometer achieves high precision
TRViewX is compatible with a variety of materials, including metals, plastics, rubbers, and films.
（ISO9513 Class 0.5, JIS B7741 class 0.5）

Evaluating food texture
EZ Test offers an ample selection of specialized jigs to support a wide variety of applications.

Name		EZ-SX	EZ-LX	EZ-LX HS
Tester Load Capacity ^{(Note 1)}		Max. 500 N	Max. 5 kN	Max. 2 kN
Crosshead Speed Range		0.001 to 1000 mm/min		0.001 to 2000 mm/min
Maximum Return Speed		1500 mm/min		3000 mm/min
Test Force Measurement	High-Precision Type ^{(Note 2)}	±0.5 % of indicated value (within 1/500 to 1/1 of load cell rated capacity) Conforms to JIS B 7721 class 0.5, ISO 7500-1 class 0.5, EN 10002-2 grade 0.5, and ASTM E4.
	Standard-Precision Type ^{(Note 2)}	±1 % of indicated value (within 1/500 to 1/1 of load cell rated capacity) Conforms to JIS B 7721 class 1, ISO 7500-1 class 1, EN 10002-2 grade 1, and ASTM E4.
	Range	1 range (rangeless)
	Test Force Calibration	Automatic calibration using calibration cable
Dimensions		W400 × D530 × H885 mm	W400 × D530 × H1315 mm
Weight		Approx. 33 kg	Approx. 55 kg

Note 1: When the load cell capacity is smaller than the tester load capacity, the former is the maximum test force.

Note 2: Shimadzu recommends validation at an installation site that meets the requirements specified in these standards.

* Appearance and specifications are subject to change without notice

Tags: